Waltham 16S 23J lever set (LS) adj. 6p Vanguard Up & Down indicator pocket watch #25402613, beautiful nickel bridge movement with a Lossier hairspring, raised gold jewel settings, a gold center wheel, diamond endstone and an elaborate concentric circle and checkerboard damascene pattern, double sunk (DS) porcelain enamel dial with large fancy Arabic-style numbers, a black marked subsidiary seconds register at 6 o'clock and a subsidiary 0-24 marked wind indicator register at 12 o'clock, dial has an unusual half-arc scratch on the lower half of the area around the center post and a small divot near 4 that may be a factory defect however no hairlines or other damage, black steel spade & whip style hands with a fancy second hand, minute hand is touched up and is likely a replacement to the set considering the scratch pattern on the dial.
Incredible white gold filled (WGF) Illinois Watch Case Co. screw back & bezel (SB&B) case with very fine line engraving vertically across the back cover, deep stylized "X" and bar engraving on both bezels, short heavy pendant with engraved floral accents and a slightly recessed crown, heavy fancy bow with matching floral accents and a glass crystal, case is showing hardly any wear with no notable smoothing to any of the engraving, no brass starting to show and only a few very light scuffs and scratches consistent with infrequent use and storage, measures approx. 52mm in diameter x 65mm in length x 14mm thick (crystal included). One of Waltham's most attractively finished high quality railroad grade movements in a case that should be seen to be truly appreciated for its hard to find condition, a beautiful watch from the 1920s that would make a fine centerpiece to any railroad watch collection in excellent+ condition overall!
- Year Made: 1926-1927
- Company:
Waltham
-
Movement Size:
0516S
- Jewels: 0523J
- Setting/Movement Type:
lever set
- Adjustments: 6 positions
- Model/Grade: Vanguard
- Serial #: 25402613
- Movement Finish: nickel
- Movement Details: wind indicator, bridge layout, diamond endstone, gold jewel settings (GJS), gold center wheel, Lossier hairspring
- Dial Material: porcelain enamel
- Dial Details:
double sunk (DS)
- Hand Style:
spade & whip
- Case Style:
SB&B
-
Case Material:
Gold Filled - White
- Case Details:
Illinois Watch Case Co.
-
Case Width/Diameter:
52mm (2.05 inches)
-
Case Length, bow included:
65mm (2.56 inches)
-
Case Thickness:
14mm (0.55 inches)
- Crystal Material: glass
- Condition:
Excellent +
-
Gender:
Gentlemen's
The Waltham watch company, and the earlier American Waltham Watch Co., which had a variety of locations over the many years it was in operation (including Waltham, Massachusetts), was in business from 1851-1957, and was one of the most prolific of the American watch companies.
As an additional resource, we've posted a
Serial Number Production List which includes information for Waltham serial numbers and dates of manufacture.
The NAWCC also has a
comprehensive article about the company; additional information may also be found on
Wikipedia.
You may browse all of our men's pocket watches from this manufacturer at our
Vintage Men's Waltham Pocket Watches category.
This watch is in good running condition, unless otherwise noted in the description. This means that on receipt, pending any item-specific running conditions noted in the description, you can expect the watch to be winding and setting properly and to run smoothly while keeping reasonable time. We consider "reasonable time" to meet these basic guidelines:
- Railroad Grade Watches will be keeping +/- 5 minutes per day
- Pocket and Wrist Watches with 15 or more jewels will be keeping +/- 10 minutes per day
- All key wind watches and watches with 14 or fewer jewels will be keeping +/- 15 minutes per day
The above guideline is the lowest standard in which we would ship out a watch, however in most cases, you will see much better timekeeping. Most of our watches have been in storage for many years, so if you plan on carrying/wearing them everyday, you should consider having them cleaned and oiled soon, and then once a year thereafter to keep them in top running condition. If the watches will be for occasional use or display, they should be cleaned and serviced every 3 to 5 years depending on use.
As of September 15th, 2025, we are not offering a cleaning and service option through PM Time Service. While we do hope to offer this again in the future, we are unfortunately unable to meet customer requests for watch servicing at this time. Please note that, unless otherwise mentioned within the "Full Description" tab, this watch is being sold in good running condition and is ready to wear or carry on arrival.
This watch comes complete with an appropriate, intact glass crystal; however, on request PM Time Service can replace the current crystal on this pocket watch for you. We offer a number of new and vintage crystal choices for pocket watches; you can select your desired choice from the dropdown menu below.
Please note that the average turnaround time for all pocket watch crystal replacements will be two days from the placement of the order.
Contact us with any further questions or for an estimate on any shipping delays.
Please note: if you add this watch with a crystal and/or band exchange option to your
shopping cart but later change your mind on the crystal and/or band selection type, you'll need to remove the watch from the cart in order to make a new selection. Once that is done, you can return to this page and add that new crystal and/or band combination to the cart. We apologize for the limitations to our system that prevent you from making that change within the shopping cart.
This is considered a "railroad-grade" pocket watch. To be a railroad-grade watch, the following criteria must be met:
- be 16S or 18S
- have 17 or more jewels
- be lever set
- be in an open face case
- be adjusted to 5 or more positions.
- have easily-legible Arabic dial numerals
In order to ensure the accuracy of pocket watches used by railroad employees, with the ultimate goal of preventing train accidents, the General Railroad Timepiece Standards Commission published a set of guidelines for railroad companies and watch manufacturers in 1893. These guidelines, which specified the criteria for a railroad-grade watch, were prepared by Webb C. Ball, the general time inspector of North American railroads and founder of the Ball Watch Company.
For more information, visit this
Wikipedia article on railroad chronometers or this
Smithsonian National Postal Museum article on the influential train wreck tragedy that resulted in the establishment of railroad watch standards.
Our entire collection of such timepieces may also be viewed at our
Railroad Grade Watches category.
Unlike modern quartz watches, most vintage watches need daily winding in order to keep the watch functioning for timekeeping. Additionally, there are a number of different ways to set the time other than simply pulling the crown away from the watch body. We are happy to provide an overview of each of the different setting types on our
"How To Use" page, where we also provide information on proper winding techniques for each style and some suggestions for the proper long term care and storage of your watch.
For your gift giving convenience, please find a consolidated overview of the information on this item, with no reference to the price, on this
printer-optimized page.