Attractive gold-toned base metal Celtic heart fob, smooth polish strips of gold colored base metal form a design of a heart intertwined with a Celtic knot, double-sided design is finished on both sides, sturdy top connector loop, measures approx. 20mm wide x 26mm tall.

Attractive silver-toned base metal Celtic heart fob, smooth polish strips of silver colored base metal form a design of a heart intertwined with a Celtic knot, double-sided design is finished on both sides, sturdy top connector loop, measures approx. 20mm wide x 26mm tall.

Attractive smooth polish gold-plated ring has a simple, sturdy connector loop at the top and the traditional hands, heart and crown claddagh design along the lower half, measures approx. 20mm wide x 24mm tall.

Attractive smooth polish silver-plated ring has a simple, sturdy connector loop at the top and the traditional hands, heart and crown claddagh design along the lower half, measures approx. 20mm wide x 24mm tall.

Simple dual-sided silver-plated base metal heart shaped fob is finished on both sides with beige (light brown) enamel, silver-plated connector ring (gold or black available on request), measures approx. 16mm wide x 16mm tall.

Simple dual-sided silver-plated base metal heart shaped fob is finished on both sides with pure black enamel, silver-plated connector ring (gold or black available on request), measures approx. 16mm wide x 16mm tall.

Simple dual-sided silver-plated base metal heart shaped fob is finished on both sides with bright blue enamel, silver-plated connector ring (gold or black available on request), measures approx. 16mm wide x 16mm tall.

Simple dual-sided silver-plated base metal heart shaped fob is finished on both sides with bright green enamel, silver-plated connector ring (gold or black available on request), measures approx. 16mm wide x 16mm tall.

Simple dual-sided silver-plated base metal heart shaped fob is finished on both sides with brown enamel, silver-plated connector ring (gold or black available on request), measures approx. 16mm wide x 16mm tall.

Simple dual-sided silver-plated base metal heart shaped fob is finished on both sides with olive green enamel, silver-plated connector ring (gold or black available on request), measures approx. 16mm wide x 16mm tall.

Simple dual-sided silver-plated base metal heart shaped fob is finished on both sides with dark orange enamel, silver-plated connector ring (gold or black available on request), measures approx. 16mm wide x 16mm tall.

Simple dual-sided silver-plated base metal heart shaped fob is finished on both sides with dark purple enamel, silver-plated connector ring (gold or black available on request), measures approx. 16mm wide x 16mm tall.

Simple dual-sided silver-plated base metal heart shaped fob is finished on both sides with light blue enamel, silver-plated connector ring (gold or black available on request), measures approx. 16mm wide x 16mm tall.

Simple dual-sided silver-plated base metal heart shaped fob is finished on both sides with light orange enamel, silver-plated connector ring (gold or black available on request), measures approx. 16mm wide x 16mm tall.

Simple dual-sided silver-plated base metal heart shaped fob is finished on both sides with lavender (light purple) enamel, silver-plated connector ring (gold or black available on request), measures approx. 16mm wide x 16mm tall.

Simple dual-sided silver-plated base metal heart shaped fob is finished on both sides with maroon (dark red) enamel, silver-plated connector ring (gold or black available on request), measures approx. 16mm wide x 16mm tall.

Simple dual-sided silver-plated base metal heart shaped fob is finished on both sides with mint green enamel, silver-plated connector ring (gold or black available on request), measures approx. 16mm wide x 16mm tall.

Simple dual-sided silver-plated base metal heart shaped fob is finished on both sides with navy blue enamel, silver-plated connector ring (gold or black available on request), measures approx. 16mm wide x 16mm tall.

Simple dual-sided silver-plated base metal heart shaped fob is finished on both sides with bright pink enamel, silver-plated connector ring (gold or black available on request), measures approx. 16mm wide x 16mm tall.

Simple dual-sided silver-plated base metal heart shaped fob is finished on both sides with bright red enamel, silver-plated connector ring (gold or black available on request), measures approx. 16mm wide x 16mm tall.

Simple dual-sided silver-plated base metal heart shaped fob is finished on both sides with salmon (dark pink) enamel, silver-plated connector ring (gold or black available on request), measures approx. 16mm wide x 16mm tall.

Simple dual-sided silver-plated base metal heart shaped fob is finished on both sides with turquoise green enamel, silver-plated connector ring (gold or black available on request), measures approx. 16mm wide x 16mm tall.

Simple dual-sided silver-plated base metal heart shaped fob is finished on both sides with pure white enamel, silver-plated connector ring (gold or black available on request), measures approx. 16mm wide x 16mm tall.

Simple dual-sided silver-plated base metal heart shaped fob is finished on both sides with bright yellow enamel, silver-plated connector ring (gold or black available on request), measures approx. 16mm wide x 16mm tall.

Simple slightly puffed semi-opaque black glass heart with a cat's eye finish that refracts light in different bands to add character to the glass, silver-plated small top connector loop, measures approx. 20mm wide x 22mm tall.

Simple slightly puffed semi-opaque green glass heart with a cat's eye finish that refracts light in different bands to add character to the glass, silver-plated small top connector loop, measures approx. 20mm wide x 22mm tall.

Simple slightly puffed semi-opaque brilliant dark blue glass heart with a cat's eye finish that refracts light in different bands to add character to the glass, silver-plated small top connector loop, measures approx. 20mm wide x 22mm tall.

Simple slightly puffed semi-opaque light grey glass heart with a cat's eye finish that refracts light in different bands to add character to the glass, silver-plated small top connector loop, measures approx. 20mm wide x 22mm tall.

Simple slightly puffed semi-opaque light blue glass heart with a cat's eye finish that refracts light in different bands to add character to the glass, silver-plated small top connector loop, measures approx. 20mm wide x 22mm tall.

Simple slightly puffed semi-opaque light green glass heart with a cat's eye finish that refracts light in different bands to add character to the glass, silver-plated small top connector loop, measures approx. 20mm wide x 22mm tall.

Simple slightly puffed semi-opaque orange glass heart with a cat's eye finish that refracts light in different bands to add character to the glass, silver-plated small top connector loop, measures approx. 20mm wide x 22mm tall.

Simple slightly puffed semi-opaque light purple glass heart with a cat's eye finish that refracts light in different bands to add character to the glass, silver-plated small top connector loop, measures approx. 20mm wide x 22mm tall.

Simple slightly puffed semi-opaque white glass heart with a cat's eye finish that refracts light in different bands to add character to the glass, silver-plated small top connector loop, measures approx. 20mm wide x 22mm tall.

Simple slightly puffed semi-opaque yellow glass heart with a cat's eye finish that refracts light in different bands to add character to the glass, silver-plated small top connector loop, measures approx. 20mm wide x 22mm tall.

Handsome pewter-toned (dark silver) base metal and multi-colored enamel fob, heavy shield has been cast in the shape of a heart and has been finished to resemble an American flag with white, deep red and dark blue enamel, sturdy top connector ring, measures approx. 20 x 17mm.

For attachment to a pocket watch chain, necklace, lanyard, zipper-pull, or other accessory; or for use by itself. The small fob of your choice will come with a matching-toned jump ring to allow you to attach the fob to the object of your liking; alternate colors of these rings (in silver, gold, and black) are available upon request at no additional charge.

Fob is attached, via a gold-toned square-shaped connector, to a 1/2" wide sturdy leather strap, measuring approx. 90mm (3 1/2") in length, offered in brown or black leather, with a gold-toned buckle. To use the fob with a pocket watch, you unbuckle and thread the top of the leather strap through the watch bow then re-buckle the strap. You can then put the watch into your pocket and the decorative plate will hang outside, enabling quick access to retrieving the watch to tell the time. These can also be used solely as a decorative piece as well by threading your belt through the leather strap and letting the fob display off.

Fob is attached, via a base-metal bar-style connector, to a 1/2" wide sturdy leather strap, measuring approx. 90mm (3 1/2") in length, offered in brown or black leather, with a silver-toned, gold-toned, or black-toned buckle. To use the fob with a pocket watch, you unbuckle and thread the top of the leather strap through the watch bow then re-buckle the strap. You can then put the watch into your pocket and the decorative plate will hang outside, enabling quick access to retrieving the watch to tell the time. These can also be used solely as a decorative piece as well by threading your belt through the leather strap and letting the fob display off.

Fob is attached to a sturdy base metal figure-8 key ring with solid base metal bail. The key chain segment measure approximately 48mm (2") in length. To add a key to the chain, pry open the top section of the key chain and slip your key between the 2 separated sections until it rests to the side. Then, release the key chain, which will snap back to the closed position.

Fob is attached to a sturdy base metal latch-style key ring with short base metal length of thick rope-style chain connecting the ring to the fob. The key chain segment measures 26mm wide x 65mm long. To use the key chain, open the clasp on the side of the latch-ring, attach your keys to the ring and then close and latch the clasp back together.

Fob is attached to a sturdy base metal split-ring key ring with a small base metal swivel connecting the ring to the fob. The key chain segment measures 33mm wide x 48mm long.

Fob is attached to a sturdy smooth polish base metal carabiner-style key ring, featuring a large tapered-rectangular body with a rounded end and spring loaded latch that closes to secure keys within the ring, heavy loop at the bottom of the body supports a swivel connector. The key chain segment measures approx. 38mm long x 24mm wide.

Fob is attached to the drop of an 8" medium weight, quality Sterling silver plate, 24k gold plate, or Hematite black plate pocket watch chain. The 6mm links on this chain are a flat, interconnecting style with a slight bevel to each link and are finished with a very high grade .925 solid silver plating, a 24k solid gold plating (both very close to a gold filled quality), or a Hematite black (black with a lustrous tone) plating, all on a solid brass base, with a thin sealant to prevent tarnishing. The three lengths of the chain (1 long and 2 short segments) are attached via a center connector ring. All feature high quality materials we're proud to carry due to their overall appearance and durability. This chain features a spring ring finding, plus a drop and a heavy swivel with secure interior latch to secure to the bow of your watch. 1.5" drop chain is ideal for attaching the fob and is finished with a small spring ring to facilitate easy addition and removal of fobs.

Fob is attached to the drop of an 8" fancy-link light weight, quality Sterling silver plate, 24k gold plate, or Hematite black plate pocket watch chain. The 5mm Figaro links on this chain are a mixed style of flat, interconnecting round links with a slight bevel and long rectangular links also with a slight bevel, overall with a very sleek, slim profile, and are finished with a very high grade .925 solid silver plating, a 24k solid gold plating (both very close to a gold filled quality), or a Hematite black (black with a lustrous tone) plating, all on a solid brass base, with a thin sealant to prevent tarnishing. The three lengths of the chain (1 long and 2 short segments) are attached via a center connector ring. All feature high quality materials we're proud to carry due to their overall appearance and durability. This chain features a t-bar finding with a center cuff detail, plus a drop and a heavy swivel with secure interior latch to secure to the bow of your watch. 1.5" drop chain is ideal for attaching the fob and is finished with a small spring ring to facilitate easy addition and removal of fobs.

Fob is attached to the drop of an 12" medium weight, quality Sterling silver plate, 24k gold plate, or Hematite black plate pocket watch chain. The 6mm links on this chain are a flat, interconnecting style with a slight bevel to each link and are finished with a very high grade .925 solid silver plating, a 24k solid gold plating (both very close to a gold filled quality), or a Hematite black (black with a lustrous tone) plating, all on a solid brass base, with a thin sealant to prevent tarnishing. The three lengths of the chain (1 long and 2 short segments) are attached via a center connector ring. All feature high quality materials we're proud to carry due to their overall appearance and durability. This chain features a t-bar finding with a center cuff detail, plus a drop and a heavy swivel with secure interior latch to secure to the bow of your watch. 1.5" drop chain is ideal for attaching the fob and is finished with a small spring ring to facilitate easy addition and removal of fobs.

Fob is attached to the drop of an 12" fancy-link medium weight, quality Sterling silver plate, 24k gold plate, or Hematite black plate pocket watch chain. The 6.5mm Figaro links on this chain are a mixed style of flat, interconnecting round links with a slight bevel and long rectangular links also with a slight bevel, overall with a very sleek, slim profile, and are finished with a very high grade .925 solid silver plating, a 24k solid gold plating (both very close to a gold filled quality), or a Hematite black (black with a lustrous tone) plating, all on a solid brass base, with a thin sealant to prevent tarnishing. The three lengths of the chain (1 long and 2 short segments) are attached via a center connector ring. All feature high quality materials we're proud to carry due to their overall appearance and durability. This chain features a t-bar finding with a center cuff detail, plus a drop and a heavy swivel with secure interior latch to secure to the bow of your watch. 1.5" drop chain is ideal for attaching the fob and is finished with a small spring ring to facilitate easy addition and removal of fobs.

Fob is attached to the drop of an 16" heavy weight, quality Sterling silver plate, 24k gold plate, or Hematite black plate pocket watch chain. The 7mm links on this chain are a flat, interconnecting style with a slight bevel to each link and are finished with a very high grade .925 solid silver plating, a 24k solid gold plating (both very close to a gold filled quality), or a Hematite black (black with a lustrous tone) plating, all on a solid brass base, with a thin sealant to prevent tarnishing. The three lengths of the chain (1 long and 2 short segments) are attached via a center connector ring. All feature high quality materials we're proud to carry due to their overall appearance and durability. This chain features a t-bar finding with a center cuff detail, plus a drop and a heavy swivel with secure interior latch to secure to the bow of your watch. 2" drop chain is ideal for attaching the fob and is finished with a small spring ring to facilitate easy addition and removal of fobs.

Pendant is finished with an 18" Singapore-style link necklace with a 1mm diameter that has been finished with a lobster-claw style clasp and 1" extender chain, a simple loop along the length of the necklace will connect the necklace to your pendant, offered in gold-plated, silver-plated or black-plated finish, with a wearable length of approx. 470mm.

Pendant is finished with an 18" leatherette necklace with a 2mm diameter that has been finished with silver-plated base metal finals, a lobster-claw style clasp and a 1.5" extender chain, a silver or gold-plated tube, matched to your pendant, with a loop slides along the length of the necklace and will connect the necklace to your pendant, offered in black, brown or dark gray, with a wearable length of approx. 490mm.

Pendant is attached to a quality 24" Sterling silver plate or 24k gold plate ladies slide chain, silicone in each hole of the smooth polish round slide enables the precision placement of the slide along the chain. Chain links, measuring approx. 1.75mm each, feature a flat, interconnecting style with a slight bevel to each link, finished with a very high grade .925 solid silver plating or a 24k solid gold plating (both very close to a gold filled quality). All feature high quality materials we're proud to carry due to their overall appearance and durability. Slide measures approx. 15mm in diameter and features a single raised bezel in the center supporting a faceted crystal accent, available in crystal clear, dark grey, or opaque black options.

Pendant is finished with a bow-style pin with large loops and wavy end ribbons supporting a small loop at the bottom of the design to connect to the pendant, straight brooch-style pin on the back with security clasp. Choice of black, copper, gold or silver-plated base metal colors, measures approx. 38 x 25mm.