Elgin 16S 7J grade 293 pocket watch #19325730, classic gilt split plate movement with steel winding gears and an elaborately engraved balance bridge, single sunk (SS) porcelain enamel dial with Roman numerals, red 5 minute Arabic markers and a black-marked subsidiary seconds register has a bright red Indian head emblem and Indian script around the center post, dial has a few faint hairlines, blue steel spade style hands, re-cased into a heavy yellow gold filled (YGF) screw back & bezel (SB&B) case with large floral engraving on the back, coin edge engraving on the edges of the frame, sculpted pendant and a heavy bow, case is showing moderate to heavy wear with some smoothing to the floral engraving and some notable spots of brass on all elements of the case, measures approx. 51mm in diameter x 71mm in length x 16mm thick (crystal included). A nice looking Indian motorcycle advertising watch from the early 1900s, still attractive even with the obvious signs of wear and perfect to carry everyday, in very good overall condition!
- Year Made: 1917-1918
-
Company:
Elgin
-
Movement Size:
0516S
- Jewels: 217J
-
Setting/Movement Type:
pendant set
- Model/Grade: 293
- Serial #: 19325730
- Movement Finish: gilt
- Dial Material: porcelain enamel
-
Dial Details:
Indian advertising, Indian script
-
Hand Style:
spade
-
Case Style:
SB&B
-
Case Material:
Gold Filled - Yellow
-
Case Details:
re-cased
-
Case Width/Diameter:
51mm (2.01 inches)
-
Case Length, bow included:
71mm (2.80 inches)
-
Case Thickness:
16mm (0.63 inches)
- Crystal Material: plastic
-
Condition:
Very Good
-
Gender:
Gentlemen's
The Elgin watch company, out of Elgin, Illinois, was in business from 1864-1964, and while active, was the largest-producing American watch company, manufacturing an estimated half of all pocket watches ("dollar" watches not included). By 1956 they had produced over 55 million pocket and wrist watches.
As an additional resource, we've posted a
Serial Number Production List which includes information for Elgin serial numbers and dates of manufacture.
The NAWCC also has a
comprehensive article about the company; additional information may also be found on
Wikipedia.
You may browse all of our men's pocket watches from this manufacturer at our
Vintage Men's Elgin Pocket Watches category.
This watch is in good running condition, unless otherwise noted in the description. This means that on receipt, pending any item-specific running conditions noted in the description, you can expect the watch to be winding and setting properly and to run smoothly while keeping reasonable time. We consider "reasonable time" to meet these basic guidelines:
- Railroad Grade Watches will be keeping +/- 5 minutes per day
- Pocket and Wrist Watches with 15 or more jewels will be keeping +/- 10 minutes per day
- All key wind watches and watches with 14 or fewer jewels will be keeping +/- 15 minutes per day
The above guideline is the lowest standard in which we would ship out a watch, however in most cases, you will see much better timekeeping. Most of our watches have been in storage for many years, so if you plan on carrying/wearing them everyday, you should consider having them cleaned and oiled soon, and then once a year thereafter to keep them in top running condition. If the watches will be for occasional use or display, they should be cleaned and serviced every 3 to 5 years depending on use.
As of November 23rd, 2025, we are not offering a cleaning and service option through PM Time Service. While we do hope to offer this again in the future, we are unfortunately unable to meet customer requests for watch servicing at this time. Please note that, unless otherwise mentioned within the "Full Description" tab, this watch is being sold in good running condition and is ready to wear or carry on arrival.
This watch comes complete with an appropriate, intact plastic crystal; however, on request PM Time Service can replace the current crystal on this pocket watch for you. We offer a number of new and vintage crystal choices for pocket watches; you can select your desired choice from the dropdown menu below.
Please note that the average turnaround time for all pocket watch crystal replacements will be two days from the placement of the order.
Contact us with any further questions or for an estimate on any shipping delays.
Please note: if you add this watch with a crystal and/or band exchange option to your
shopping cart but later change your mind on the crystal and/or band selection type, you'll need to remove the watch from the cart in order to make a new selection. Once that is done, you can return to this page and add that new crystal and/or band combination to the cart. We apologize for the limitations to our system that prevent you from making that change within the shopping cart.
On all but a few of the advertising logos, mainly Packard from the Hamilton company and Studebaker from South Bend, the logos would have been commissioned through a professional dial company after they left the factory to have the logo applied. For instance, a car dealership might have them added as a promotion, a motorcycle club would have ones done for each of their members, a company would have them added for their employees, etc.
On the watch/logo combinations that may not match up on a timeline (the watch was made prior to the automobile company being formed, for instance), what we understand could have happened is, say for a car club, the members would need to provide their own watch to which the emblems would be added. Someone might have wanted a Harley logo on "Grandpa Bob's" old pocket watch, and would have had the dial pulled from that. Other than the Packard/Hamilton & Studebaker/South Bend arrangements, it was a free-for-all on the pairings and you could find just about any combination of manufacturer with the different logos.
We do also have a pretty good selection of the vintage dials that have emblems on them, but that are not attached to a watch yet. Often in the past, a customer would want a watch without the advertising, so we would just pull the printed dial and replace it with a similar-style plain dial, then set the printed one aside. If you have something specific you are looking for, please
drop us a note to see if we have anything in our stock that might work for you.
And, if you are interested in this watch without the current advertising dial, please
drop us a note as well. On wrist watches, we can give you a quote on what the current charge to re-finish the dial would be (typically it will run $35 to $75 depending on the dial style). On American-make pocket watches, we may have a replacement dial in stock and could exchange the current dial with an unmarked dial for a small fee. Most European-make watches would need to have the dial refinished to remove the emblem.
Unlike modern quartz watches, most vintage watches need daily winding in order to keep the watch functioning for timekeeping. Additionally, there are a number of different ways to set the time other than simply pulling the crown away from the watch body. We are happy to provide an overview of each of the different setting types on our
"How To Use" page, where we also provide information on proper winding techniques for each style and some suggestions for the proper long term care and storage of your watch.
For your gift giving convenience, please find a consolidated overview of the information on this item, with no reference to the price, on this
printer-optimized page.
