Schild Freres-Eterna 46mm 15J PS Columbus pocket watch #997310, beautiful gilt split plate movement with a fancy plate layout, steel winding wheels and a wide gold balance wheel jewel settings that has 2 additional jewels, movement is marked with "PROT" in a cross along with the serial number and "Columbus" under a fancy oval logo, porcelain enamel dial with fancy Arabic-style numbers and a subsidiary seconds register is marked with the jeweler's name "Wilh. Floricke Sudenburg", dial has a small flake on the edge of the dial but no hairlines, fancy gold steel Louis XIV style hands, heavy smooth 0.800 silver hallmarked IXL HB&B case with engine turning around the fancy blank monogram shield surrounded by floral engraving, large heavy bow, thick glass crystal and gold trim on the bezels, dust cover is marked "Anker Spiral Breguet 15 Steine", case is showing normal even wear overall with some smoothing to the engraving on the back bezel and the gold trim worn off from approx. half of the front and back bezels and frame, measures approx. 51mm in diameter x 72mm in length x 14mm thick (crystal included). A very handsome, high quality vintage watch from the 1890s in excellent+ condition!
- Year Made: 1898-1899
- Company: Schild Freres-Eterna
- Jewels: 16J
- Setting/Movement Type:
- Model/Grade: Columbus
- Serial #: 997310
- Movement Finish: gilt
- Dial Material: porcelain enamel
- Dial Details: jeweler's mark, "Wilh. Floricke Sudenburg"
- Hand Style:
- Case Style:
Silver - Sterling/Solid
- Case Details: IXL, extra-thick glass crystal, gold trimmed bezels
Case Length, bow included:
- Crystal Material: glass
This watch is in good running condition, unless otherwise noted in the description. This means that on receipt, pending any item-specific running conditions noted in the description, you can expect the watch to be winding and setting properly and to run smoothly while keeping reasonable time. We consider "reasonable time" to meet these basic guidelines:
- Railroad Grade Watches will be keeping +/- 5 minutes per day
- Pocket and Wrist Watches with 15 or more jewels will be keeping +/- 10 minutes per day
- All key wind watches and watches with 14 or fewer jewels will be keeping +/- 15 minutes per day
The above guideline is the lowest standard in which we would ship out a watch, however in most cases, you will see much better timekeeping. Most of our watches have been in storage for many years, so if you plan on carrying/wearing them everyday, you should consider having them cleaned and oiled soon, and then once a year thereafter to keep them in top running condition. If the watches will be for occasional use or display, they should be cleaned and serviced every 3 to 5 years depending on use.
As of May 17th, 2022, we are not offering a cleaning and service option through PM Time Service. While we do hope to offer this again in the future, we are unfortunately unable to meet customer requests for watch servicing at this time. Please note that, unless otherwise mentioned within the "Full Description" tab, this watch is being sold in good running condition and is ready to wear or carry on arrival.
This watch comes complete with an appropriate, intact glass crystal; however, on request PM Time Service can replace the current crystal on this pocket watch for you. We offer a number of new and vintage crystal choices for pocket watches; you can select your desired choice from the dropdown menu below.
Please note that the average turnaround time for all pocket watch crystal replacements will be two days from the placement of the order.
with any further questions or for an estimate on any shipping delays.
Please note: if you add this watch with a crystal exchange option to your shopping cart
but later change your mind on the crystal selection type, you'll need to remove the watch from the cart in order to make a new crystal selection. Once that is done, you can return to this page and add that new combination to the cart. We apologize for the limitations to our system that prevent you making that change from the shopping cart directly.
This watch features a jeweler's mark, or name of the retailer that originally sold the watch, in addition to the name of the watch manufacturer. Jeweler's marks may be engraved or printed on the dial, case or movement, depending on the watch. See the Full Description for details specific to this piece.
The jewelers' mark was a pretty common practice during the early to mid-1900s, and does continue today. A jewelry shop would commission a small run of watches directly from a watch manufacturer, such as Hamilton, Illinois, etc., who would then add markings for that jeweler at the factory to the dial, movement and/or case. This would allow for the jeweler to offer a customized branding of a high quality watch without the prohibitive cost of directly manufacturing the watch components and assembly.
The most common example that most will recognize is with Tiffany & Co., which for a short time did manufacture their own watches but realized it was cost prohibitive for their label and transitioned to commissioning watches from high-end watch manufacturers instead. On many of their vintage watches, you'll see the "Tiffany & Co" markings on the dial, and occasionally also stamped on the movement and case, but additional markings on the movement will show Longines, International Watch Co., etc. to also indicate the manufacturing company.
Unlike modern quartz watches, most vintage watches need daily winding in order to keep the watch functioning for timekeeping. Additionally, there are a number of different ways to set the time other than simply pulling the crown away from the watch body. We are happy to provide an overview of each of the different setting types on our "How To Use" page
, where we also provide information on proper winding techniques for each style and some suggestions for the proper long term care and storage of your watch.
For your gift giving convenience, please find a consolidated overview of the information on this item, with no reference to the price, on this printer-optimized page