Hamilton 16S 21J lever set (LS) adj. 5p 992 pocket watch #1225969, handsome nickel split plate movement with screw-down gold jewel settings (GJS), a gold center wheel and a tight bar-style damascene pattern, double sunk (DS) hard enamel Montgomery-style dial with large fancy black Arabic-style numbers, red & black 1-60 minute markers and a black marked subsidiary seconds register, marked "Hamilton Railway Special", dial has a few small scratches and scuffs on the lower numbers however no crazing, cracks or notable damage, blue steel spade style hands.
Impressive Keystone green gold filled (GGF) fully engraved screw back & bezel (SB&B) case with fancy floral and geometric vertical line engraving on the back with a wide oval monogram shield at 6 o'clock, fancy monogram initial possibly an "F", deep floral design engraving on both bezels, coin edge engraving on the frame, heavy pendant with a recessed crown and a fancy floral engraved bow, interior of back case is inscribed "E.P. Funk.", the color on this case is towards the green end of the yellow gold spectrum and may be considered green gold filled (GGF) under some lighting conditions, case is showing only light even wear overall with a few small spots of brass starting to show on the back bezel, crown and bow, measures approx. 51mm in diameter x 64mm in length x 15mm thick (crystal included). An attractive, high quality vintage railroad grade Hamilton pocket watch from the early 1900s in excellent+ overall condition!
- Year Made: 1917-1918
- Company: Hamilton
- Jewels: 21J
- Setting/Movement Type:
- Adjustments: 5 positions
- Model/Grade: 992
- Serial #: 1225969
- Movement Finish: nickel
- Movement Details: gold jewel settings (GJS), screw-down jewel settings, gold center wheel
- Dial Material: hard enamel
- Dial Color: white
- Dial Details: Montgomery style
- Hand Style:
- Case Style:
Gold Filled - Yellow
- Case Details: Keystone, monogram, inscription "E.P. Funk"
Case Length, bow included:
- Crystal Material: plastic
The Hamilton watch company began business in Lancaster, Pennsylvania in 1892 and still operates today. The last watches produced in the American factory were made in 1969, after which the company was sold to a Swiss owner.
We also offer a collection of reference and research books for a number of different watch manufacturers, which can be found in our Watch-Related Books
section. As an additional resource, we've posted a Serial Number Production List
which includes information for Hamilton serial numbers and dates of manufacture.
The NAWCC also has a about the company.
You may browse all of our men's pocket watches from this manufacturer at our Vintage Men's Hamilton Pocket Watches
This watch is in good running condition, unless otherwise noted in the description. This means that on receipt, pending any item-specific running conditions noted in the description, you can expect the watch to be winding and setting properly and to run smoothly while keeping reasonable time. We consider "reasonable time" to meet these basic guidelines:
- Railroad Grade Watches will be keeping +/- 5 minutes per day
- Pocket and Wrist Watches with 15 or more jewels will be keeping +/- 10 minutes per day
- All key wind watches and watches with 14 or fewer jewels will be keeping +/- 15 minutes per day
The above guideline is the lowest standard in which we would ship out a watch, however in most cases, you will see much better timekeeping. Most of our watches have been in storage for many years, so if you plan on carrying/wearing them everyday, you should consider having them cleaned and oiled soon, and then once a year thereafter to keep them in top running condition. If the watches will be for occasional use or display, they should be cleaned and serviced every 3 to 5 years depending on use.
As of December 9th, 2022, we are not offering a cleaning and service option through PM Time Service. While we do hope to offer this again in the future, we are unfortunately unable to meet customer requests for watch servicing at this time. Please note that, unless otherwise mentioned within the "Full Description" tab, this watch is being sold in good running condition and is ready to wear or carry on arrival.
This watch comes complete with an appropriate, intact plastic crystal; however, on request PM Time Service can replace the current crystal on this pocket watch for you. We offer a number of new and vintage crystal choices for pocket watches; you can select your desired choice from the dropdown menu below.
Please note that the average turnaround time for all pocket watch crystal replacements will be two days from the placement of the order.
with any further questions or for an estimate on any shipping delays.
Please note: if you add this watch with a crystal and/or band exchange option to your shopping cart
but later change your mind on the crystal and/or band selection type, you'll need to remove the watch from the cart in order to make a new selection. Once that is done, you can return to this page and add that new crystal and/or band combination to the cart. We apologize for the limitations to our system that prevent you from making that change within the shopping cart.
This is considered a "railroad-grade" pocket watch. To be a railroad-grade watch, the following criteria must be met:
- be 16S or 18S
- have 17 or more jewels
- be lever set
- be in an open face case
- be adjusted to 5 or more positions.
- have easily-legible Arabic dial numerals
In order to ensure the accuracy of pocket watches used by railroad employees, with the ultimate goal of preventing train accidents, the General Railroad Timepiece Standards Commission published a set of guidelines for railroad companies and watch manufacturers in 1893. These guidelines, which specified the criteria for a railroad-grade watch, were prepared by Webb C. Ball, the general time inspector of North American railroads and founder of the Ball Watch Company.
For more information, visit this Wikipedia article
on railroad chronometers or this Smithsonian National Postal Museum article
on the influential train wreck tragedy that resulted in the establishment of railroad watch standards.
Our entire collection of such timepieces may also be viewed at our Railroad Grade Watches
Unlike modern quartz watches, most vintage watches need daily winding in order to keep the watch functioning for timekeeping. Additionally, there are a number of different ways to set the time other than simply pulling the crown away from the watch body. We are happy to provide an overview of each of the different setting types on our "How To Use" page
, where we also provide information on proper winding techniques for each style and some suggestions for the proper long term care and storage of your watch.
For your gift giving convenience, please find a consolidated overview of the information on this item, with no reference to the price, on this printer-optimized page