Waltham 16S 23J lever set (LS) adj. 5p Vanguard Up & Down indicator pocket watch #18065287, beautiful nickel bridge-style movement with raised gold jewel settings, gold center wheel and an elaborate concentric circle damascene pattern, double sunk (DS) porcelain enamel dial with fancy Arabic-style numbers, red 5 minute markers and subsidiary power and seconds registers has a very small divot near the edge at 1 o'clock, possibly a factory defect, however no hairlines or other notable defects, blue steel spade-style hands, heavy yellow gold filled (YGF) screw back & bezel (SB&B) smooth polish case with coin edge bezels, heavy hidden pendant, heavy square bow and a thick glass crystal, case is showing light even wear overall with a very small spot of brass starting to show on the pendant near the crown, measures approx. 52mm in diameter x 65mm in length x 9mm thick (crystal included). An impressive, high grade Waltham from the early 1900s in excellent+ condition!
- Year Made: 1910-1911
- Jewels: 23J
- Setting/Movement Type:
- Adjustments: 5 positions
- Model/Grade: Vanguard Up & Down indicator
- Serial #: 18065287
- Movement Finish: nickel
- Movement Details: wind indicator, gold jewel settings (GJS), gold center wheel, bridge layout
- Dial Material: porcelain enamel
- Hand Style:
- Case Style:
Gold Filled - Yellow
Case Length, bow included:
- Crystal Material: glass
The Waltham watch company, and the earlier American Waltham Watch Co., which had a variety of locations over the many years it was in operation (including Waltham, Massachusetts), was in business from 1851-1957, and was one of the most prolific of the American watch companies.
As an additional resource, we've posted a Serial Number Production List
which includes information for Waltham serial numbers and dates of manufacture.
The NAWCC also has a comprehensive article
about the company; additional information may also be found on Wikipedia
You may browse all of our men's pocket watches from this manufacturer at our Vintage Men's Waltham Pocket Watches
This watch is in good running condition, unless otherwise noted in the description. This means that on receipt, pending any item-specific running conditions noted in the description, you can expect the watch to be winding and setting properly and to run smoothly while keeping reasonable time. We consider "reasonable time" to meet these basic guidelines:
- Railroad Grade Watches will be keeping +/- 5 minutes per day
- Pocket and Wrist Watches with 15 or more jewels will be keeping +/- 10 minutes per day
- All key wind watches and watches with 14 or fewer jewels will be keeping +/- 15 minutes per day
The above guideline is the lowest standard in which we would ship out a watch, however in most cases, you will see much better timekeeping. Most of our watches have been in storage for many years, so if you plan on carrying/wearing them everyday, you should consider having them cleaned and oiled soon, and then once a year thereafter to keep them in top running condition. If the watches will be for occasional use or display, they should be cleaned and serviced every 3 to 5 years depending on use.
As of September 28th, 2023, we are not offering a cleaning and service option through PM Time Service. While we do hope to offer this again in the future, we are unfortunately unable to meet customer requests for watch servicing at this time. Please note that, unless otherwise mentioned within the "Full Description" tab, this watch is being sold in good running condition and is ready to wear or carry on arrival.
This is considered a "railroad-grade" pocket watch. To be a railroad-grade watch, the following criteria must be met:
- be 16S or 18S
- have 17 or more jewels
- be lever set
- be in an open face case
- be adjusted to 5 or more positions.
- have easily-legible Arabic dial numerals
In order to ensure the accuracy of pocket watches used by railroad employees, with the ultimate goal of preventing train accidents, the General Railroad Timepiece Standards Commission published a set of guidelines for railroad companies and watch manufacturers in 1893. These guidelines, which specified the criteria for a railroad-grade watch, were prepared by Webb C. Ball, the general time inspector of North American railroads and founder of the Ball Watch Company.
For more information, visit this Wikipedia article
on railroad chronometers or this Smithsonian National Postal Museum article
on the influential train wreck tragedy that resulted in the establishment of railroad watch standards.
Our entire collection of such timepieces may also be viewed at our Railroad Grade Watches
Unlike modern quartz watches, most vintage watches need daily winding in order to keep the watch functioning for timekeeping. Additionally, there are a number of different ways to set the time other than simply pulling the crown away from the watch body. We are happy to provide an overview of each of the different setting types on our "How To Use" page
, where we also provide information on proper winding techniques for each style and some suggestions for the proper long term care and storage of your watch.
For your gift giving convenience, please find a consolidated overview of the information on this item, with no reference to the price, on this printer-optimized page