Illinois 16S 17J LS adj. 5p Bunn pocket watch #2576121, beautiful nickel split-plate movement with raised gold jewel settings, gold train & center wheel and a sunburst damascene pattern, double-sunk (DS) porcelain enamel Montgomery dial with Gothic-style Arabic numbers, red and black minute markers and a subsidiary seconds register has a tapered defect at the edge near 10 o'clock, possibly a factory defect, however no hairlines or other notable defects, purple steel spade & whip style hands, re-cased into a heavy yellow gold filled (YGF) swing-ring case with a distinctive, crisp engraving design on the back, fish-scale engine turning is behind the diamond-shaped design across the center, which has been finished with floral and geometric patterns and surrounds a tall oval center detail framing a fancy blank monogram shield, heavy French-style bow and thick glass crystal, case is showing only very light wear, measures approx. 53mm in diameter x 72mm in length x 14mm thick (crystal included). An impressive, high quality railroad grade Illinois from the early 1900s in excellent+ condition with a case that must be seen to be fully appreciated!
- Year Made: 1913-1914
- Company: Illinois
- Jewels: 17J
- Setting/Movement Type:
- Adjustments: 5 positions
- Model/Grade: Bunn
- Serial #: 2576121
- Movement Finish: nickel
- Movement Details: raised gold jewel settings (GJS), gold train, gold center wheel
- Dial Material: porcelain enamel
- Dial Details: Montgomery style
- Hand Style:
- Case Style:
Gold Filled - Yellow
- Case Details: French bow, re-cased
Case Length, bow included:
- Crystal Material: glass
The Illinois Watch Company was founded in Springfield, Illinois and began production of its earliest branded models in 1872, although the company had been producing small runs of watches with various other markings as early as 1869. In 1927, the Hamilton Watch Company purchased Illinois and manufactured watches in the Springfield factory up until 1932. Afterwards, Hamilton continued to produce watches with Illinois Watch Company markings from their main factory in Lancaster, Pennsylvania until 1939.
As an additional resource, we've posted a Serial Number Production List
which includes information for Illinois serial numbers and dates of manufacture.
The NAWCC also has a about the company.
You may browse all of our men's pocket watches from this manufacturer at our Vintage Men's Illinois Pocket Watches
This watch is in good running condition, unless otherwise noted in the description. This means that on receipt, pending any item-specific running conditions noted in the description, you can expect the watch to be winding and setting properly and to run smoothly while keeping reasonable time. We consider "reasonable time" to meet these basic guidelines:
- Railroad Grade Watches will be keeping +/- 5 minutes per day
- Pocket and Wrist Watches with 15 or more jewels will be keeping +/- 10 minutes per day
- All key wind watches and watches with 14 or fewer jewels will be keeping +/- 15 minutes per day
The above guideline is the lowest standard in which we would ship out a watch, however in most cases, you will see much better timekeeping. Most of our watches have been in storage for many years, so if you plan on carrying/wearing them everyday, you should consider having them cleaned and oiled soon, and then once a year thereafter to keep them in top running condition. If the watches will be for occasional use or display, they should be cleaned and serviced every 3 to 5 years depending on use.
As of October 6th, 2022, we are not offering a cleaning and service option through PM Time Service. While we do hope to offer this again in the future, we are unfortunately unable to meet customer requests for watch servicing at this time. Please note that, unless otherwise mentioned within the "Full Description" tab, this watch is being sold in good running condition and is ready to wear or carry on arrival.
This is considered a "railroad-grade" pocket watch. To be a railroad-grade watch, the following criteria must be met:
- be 16S or 18S
- have 17 or more jewels
- be lever set
- be in an open face case
- be adjusted to 5 or more positions.
- have easily-legible Arabic dial numerals
In order to ensure the accuracy of pocket watches used by railroad employees, with the ultimate goal of preventing train accidents, the General Railroad Timepiece Standards Commission published a set of guidelines for railroad companies and watch manufacturers in 1893. These guidelines, which specified the criteria for a railroad-grade watch, were prepared by Webb C. Ball, the general time inspector of North American railroads and founder of the Ball Watch Company.
For more information, visit this Wikipedia article
on railroad chronometers or this Smithsonian National Postal Museum article
on the influential train wreck tragedy that resulted in the establishment of railroad watch standards.
Our entire collection of such timepieces may also be viewed at our Railroad Grade Watches
Unlike modern quartz watches, most vintage watches need daily winding in order to keep the watch functioning for timekeeping. Additionally, there are a number of different ways to set the time other than simply pulling the crown away from the watch body. We are happy to provide an overview of each of the different setting types on our "How To Use" page
, where we also provide information on proper winding techniques for each style and some suggestions for the proper long term care and storage of your watch.
For your gift giving convenience, please find a consolidated overview of the information on this item, with no reference to the price, on this printer-optimized page