Illinois 16S 21J lever set (LS) adj. 6p 60 hour Elinvar Bunn Special grade 161A pocket watch #5568718, beautiful split plate nickel movement with screw-down raised gold jewel settings (GJS), gold train and center wheel, diamond endstone and an extra fancy concentric circle pattern damascene, double-sunk (DS) porcelain enamel dial with bold fancy Arabic-style numbers and subsidiary seconds register has a very short faint hairline at 5:30 otherwise mint, blue and purple steel spade & whip style hands, re-cased into a handsome yellow gold filled (YGF) fully engraved screw back & bezel (SB&B) case with compass designs on either side of the center section, which is finished with vertical line engraving under the fancy monogram shield, monogram in shield possibly "DG". geometric engraving on both bezels and on the fancy bow, measures approx. 51mm in diameter x 63mm in length x 14mm thick (crystal included) and is showing light even wear, thick glass crystal. An impressive, high grade Illinois watch to carry or collect in excellent condition!
- Year Made: 1934-1935
- Company: Illinois (made by Hamilton)
- Jewels: 21J
- Setting/Movement Type:
- Adjustments: 6 positions
- Model/Grade: 60 hour Elinvar Bunn Special grade 161A
- Serial #: 5568718
- Movement Finish: nickel
- Movement Details: gold jewel settings (GJS), gold train & center wheel, diamond endstone
- Dial Material: porcelain enamel
- Hand Style:
- Case Style:
Gold Filled - Yellow
- Case Details: re-cased
51mm (2.01 inches)
Case Length, bow included:
- Crystal Material: glass
- Misc. Info: re-cased, mis-matched hands
This watch is in good running condition, unless otherwise noted in the description. This means that on receipt, pending any item-specific running conditions noted in the description, you can expect the watch to be winding and setting properly and to run smoothly while keeping reasonable time. We consider "reasonable time" to meet these basic guidelines:
- Railroad Grade Watches will be keeping +/- 5 minutes per day
- Pocket and Wrist Watches with 15 or more jewels will be keeping +/- 10 minutes per day
- All key wind watches and watches with 14 or fewer jewels will be keeping +/- 15 minutes per day
The above guideline is the lowest standard in which we would ship out a watch, however in most cases, you will see much better timekeeping. Most of our watches have been in storage for many years, so if you plan on carrying/wearing them everyday, you should consider having them cleaned and oiled soon, and then once a year thereafter to keep them in top running condition. If the watches will be for occasional use or display, they should be cleaned and serviced every 3 to 5 years depending on use.
As of July 29th, 2021, we are not offering a cleaning and service option through PM Time Service. While we do hope to offer this again in the future, we are unfortunately unable to meet customer requests for watch servicing at this time. Please note that, unless otherwise mentioned within the "Full Description" tab, this watch is being sold in good running condition and is ready to wear or carry on arrival.
This watch comes complete with an appropriate, intact glass crystal; however, on request PM Time Service can replace the current crystal on this pocket watch for you. We offer a number of new and vintage crystal choices for pocket watches; you can select your desired choice from the dropdown menu below.
Please note that the average turnaround time for all pocket watch crystal replacements will be two days from the placement of the order.
with any further questions or for an estimate on any shipping delays.
Please note: if you add this watch with a crystal exchange option to your shopping cart
but later change your mind on the crystal selection type, you'll need to remove the watch from the cart in order to make a new crystal selection. Once that is done, you can return to this page and add that new combination to the cart. We apologize for the limitations to our system that prevent you making that change from the shopping cart directly.
This is considered a "railroad-grade" pocket watch. To be a railroad-grade watch, the following criteria must be met:
- be 16S or 18S
- have 17 or more jewels
- be lever set
- be in an open face case
- be adjusted to 5 or more positions.
- have easily-legible Arabic dial numerals
In order to ensure the accuracy of pocket watches used by railroad employees, with the ultimate goal of preventing train accidents, the General Railroad Timepiece Standards Commission published a set of guidelines for railroad companies and watch manufacturers in 1893. These guidelines, which specified the criteria for a railroad-grade watch, were prepared by Webb C. Ball, the general time inspector of North American railroads and founder of the Ball Watch Company.
For more information, visit this Wikipedia article
on railroad chronometers or this Smithsonian National Postal Museum article
on the influential train wreck tragedy that resulted in the establishment of railroad watch standards.
Our entire collection of such timepieces may also be viewed at our Railroad Grade Watches
Unlike modern quartz watches, most vintage watches need daily winding in order to keep the watch functioning for timekeeping. Additionally, there are a number of different ways to set the time other than simply pulling the crown away from the watch body. We are happy to provide an overview of each of the different setting types on our "How To Use" page
, where we also provide information on proper winding techniques for each style and some suggestions for the proper long term care and storage of your watch.
For your gift giving convenience, please find a consolidated overview of the information on this item, with no reference to the price, on this printer-optimized page