Illinois 16S 17J lever set (LS) adj. 3p grade 185 pocket watch #2231990, beautiful nickel 3-finger bridge movement with half-moon style winding click, screw-down jewel settings and a fancy wavy line style damascene pattern, double sunk (DS) porcelain enamel dial with gothic-style Arabic numbers, red 5 minute markers and a subsidiary seconds register is marked "How Brothers. La Porte, Ind.", dial does have 2 expert repairs at 5 & 7 o'clock by the seconds register, blue steel open diamond-style hands, re-cased into a lovely yellow gold filled (YGF) screw back & bezel (SB&B) case with a concentric circle engraving design about the fancy monogram shield in the center and large floral accents at the cardinal points, inscription in the shield reads "Floyd Tollerson", coin edge accent on the front bezel rim, engraved French-style bow and glass crystal, case is showing normal even wear overall but has some light smoothing to the engraving on the back, some spots of brass starting on the frame and along the top of the bow, measures approx. 49mm in diameter x 66mm in length x 12mm thick (crystal included). An attractive, high quality vintage watch from the early 1900s in excellent condition!
- Year Made: 1910-1911
- Company: Illinois
- Jewels: 17J
- Setting/Movement Type:
- Adjustments: 1-3 positions
- Model/Grade: 185
- Serial #: 2231990
- Movement Finish: nickel
- Movement Details: half-moon click
- Dial Material: porcelain enamel
- Dial Details: Gothic-style numbers, jeweler's mark, "How Brothers. La Porte, Ind."
- Hand Style:
- Case Style:
Gold Filled - Yellow
- Case Details: French bow, re-cased, "Floyd Tollerson" inscription
Case Length, bow included:
- Crystal Material: glass
The Illinois Watch Company was founded in Springfield, Illinois and began production of its earliest branded models in 1872, although the company had been producing small runs of watches with various other markings as early as 1869. In 1927, the Hamilton Watch Company purchased Illinois and manufactured watches in the Springfield factory up until 1932. Afterwards, Hamilton continued to produce watches with Illinois Watch Company markings from their main factory in Lancaster, Pennsylvania until 1939.
As an additional resource, we've posted a Serial Number Production List
which includes information for Illinois serial numbers and dates of manufacture.
The NAWCC also has a about the company.
You may browse all of our men's pocket watches from this manufacturer at our Vintage Men's Illinois Pocket Watches
This watch is in good running condition, unless otherwise noted in the description. This means that on receipt, pending any item-specific running conditions noted in the description, you can expect the watch to be winding and setting properly and to run smoothly while keeping reasonable time. We consider "reasonable time" to meet these basic guidelines:
- Railroad Grade Watches will be keeping +/- 5 minutes per day
- Pocket and Wrist Watches with 15 or more jewels will be keeping +/- 10 minutes per day
- All key wind watches and watches with 14 or fewer jewels will be keeping +/- 15 minutes per day
The above guideline is the lowest standard in which we would ship out a watch, however in most cases, you will see much better timekeeping. Most of our watches have been in storage for many years, so if you plan on carrying/wearing them everyday, you should consider having them cleaned and oiled soon, and then once a year thereafter to keep them in top running condition. If the watches will be for occasional use or display, they should be cleaned and serviced every 3 to 5 years depending on use.
As of January 18th, 2022, we are not offering a cleaning and service option through PM Time Service. While we do hope to offer this again in the future, we are unfortunately unable to meet customer requests for watch servicing at this time. Please note that, unless otherwise mentioned within the "Full Description" tab, this watch is being sold in good running condition and is ready to wear or carry on arrival.
This watch comes complete with an appropriate, intact glass crystal; however, on request PM Time Service can replace the current crystal on this
pocket watch for you. We offer a number of new and vintage crystal choices for pocket
watches; as this watch is currently offered at our
, please message us on Etsy when purchasing this item to request a new crystal.
Please note that the average turnaround time for all pocket watch crystal replacements will be two days from the placement of the order; wrist watches will typically also take two days, however we do not carry every model of crystal in stock and there may be a delay of up to seven business days as we order the correct item from our supplier.
with any further questions or for an estimate on any shipping delays.
This watch features a jeweler's mark, or name of the retailer that originally sold the watch, in addition to the name of the watch manufacturer. Jeweler's marks may be engraved or printed on the dial, case or movement, depending on the watch. See the Full Description for details specific to this piece.
The jewelers' mark was a pretty common practice during the early to mid-1900s, and does continue today. A jewelry shop would commission a small run of watches directly from a watch manufacturer, such as Hamilton, Illinois, etc., who would then add markings for that jeweler at the factory to the dial, movement and/or case. This would allow for the jeweler to offer a customized branding of a high quality watch without the prohibitive cost of directly manufacturing the watch components and assembly.
The most common example that most will recognize is with Tiffany & Co., which for a short time did manufacture their own watches but realized it was cost prohibitive for their label and transitioned to commissioning watches from high-end watch manufacturers instead. On many of their vintage watches, you'll see the "Tiffany & Co" markings on the dial, and occasionally also stamped on the movement and case, but additional markings on the movement will show Longines, International Watch Co., etc. to also indicate the manufacturing company.
Unlike modern quartz watches, most vintage watches need daily winding in order to keep the watch functioning for timekeeping. Additionally, there are a number of different ways to set the time other than simply pulling the crown away from the watch body. We are happy to provide an overview of each of the different setting types on our "How To Use" page
, where we also provide information on proper winding techniques for each style and some suggestions for the proper long term care and storage of your watch.
For your gift giving convenience, please find a consolidated overview of the information on this item, with no reference to the price, on this printer-optimized page