Illinois 16S 21J lever set (LS) adj. 5p A. Lincoln #2167773 pocket watch, beautiful nickel 3/4 split plate movement with a fancy plate layout, screw-down gold jewel settings (GJS), gold train & center wheel and a tight-bar style damascene pattern, mint double-sunk (DS) porcelain enamel dial with fancy Gothic-style Arabic numbers, red 5 minute markers and a subsidiary seconds register, purple steel spade style hands, re-cased into a heavy yellow gold filled (YGF) screw back & bezel (SB&B) case with a floral design engraved around the large center round monogram shield, elaborate monogram possibly "HL", glass crystal & heavy bow, inside of back cover has been expertly engraved with a Masonic compass and inscribed "Henry Ludeuran No. 151", back cover and bow have a few spots of moderate wear, otherwise case showing normal even wear, measures approx. 49mm in diameter x 13mm thick (crystal included). An attractive high grade Illinois in excellent condition!
- Year Made: 1909-1910
- Company: Illinois
- Jewels: 21J
- Setting/Movement Type:
- Adjustments: 5 positions
- Model/Grade: A. Lincoln
- Serial #: 2167773
- Movement Finish: nickel
- Movement Details: gold jewel settings (GJS), gold train & center wheel
- Dial Material: porcelain enamel
- Dial Details: gothic-style Arabic numbers
- Case Style:
Gold Filled - Yellow
- Case Details: Masonic compass engraving
49mm (1.93 inches)
Case Length, bow included:
- Crystal Material: glass
The Illinois Watch Company was founded in Springfield, Illinois and began production of its earliest branded models in 1872, although the company had been producing small runs of watches with various other markings as early as 1869. In 1927, the Hamilton Watch Company purchased Illinois and manufactured watches in the Springfield factory up until 1932. Afterwards, Hamilton continued to produce watches with Illinois Watch Company markings from their main factory in Lancaster, Pennsylvania until 1939.
As an additional resource, we've posted a Serial Number Production List
which includes information for Illinois serial numbers and dates of manufacture.
The NAWCC also has a about the company.
You may browse all of our men's pocket watches from this manufacturer at our Vintage Men's Illinois Pocket Watches
This watch is in good running condition, unless otherwise noted in the description. This means that on receipt, pending any item-specific running conditions noted in the description, you can expect the watch to be winding and setting properly and to run smoothly while keeping reasonable time. We consider "reasonable time" to meet these basic guidelines:
- Railroad Grade Watches will be keeping +/- 5 minutes per day
- Pocket and Wrist Watches with 15 or more jewels will be keeping +/- 10 minutes per day
- All key wind watches and watches with 14 or fewer jewels will be keeping +/- 15 minutes per day
The above guideline is the lowest standard in which we would ship out a watch, however in most cases, you will see much better timekeeping. Most of our watches have been in storage for many years, so if you plan on carrying/wearing them everyday, you should consider having them cleaned and oiled soon, and then once a year thereafter to keep them in top running condition. If the watches will be for occasional use or display, they should be cleaned and serviced every 3 to 5 years depending on use.
We do have a professional watchmaker that does all of our cleaning and repair work for us. To have your watch serviced before shipping, simply add this Cleaning/Service Agreement
to your shopping basket. The cleaning and timing service is $95, and depending on the time of the year, has a turnaround time of 1 to 3 weeks.
Please note that we provide this service in addition to the listed purchase price of our watches. If you do purchase this option and later decide to return the watch, this fee is non-refundable.
This watch comes complete with an appropriate, intact glass crystal; however, on request PM Time Service can replace the current crystal on this pocket watch for you. We offer a number of new and vintage crystal choices for pocket watches; you can select your desired choice from the dropdown menu below.
Please note that the average turnaround time for all pocket watch crystal replacements will be two days from the placement of the order.
for any further questions or for an estimate on any shipping delays.
Please note: if you add this watch with a crystal exchange option to your shopping cart
but later change your mind on the crystal selection type, you'll need to remove the watch from the cart in order to make a new crystal selection. Once that is done, you can return to this page and add that new combination to the cart. We apologize for the limitations to our system that prevent you making that change from the shopping cart directly.
This is considered a "railroad-grade" pocket watch. To be a railroad-grade watch, the following criteria must be met:
- be 16S or 18S
- have 17 or more jewels
- be lever set
- be in an open face case
- be adjusted to 5 or more positions.
- have easily-legible Arabic dial numerals
In order to ensure the accuracy of pocket watches used by railroad employees, with the ultimate goal of preventing train accidents, the General Railroad Timepiece Standards Commission published a set of guidelines for railroad companies and watch manufacturers in 1893. These guidelines, which specified the criteria for a railroad-grade watch, were prepared by Webb C. Ball, the general time inspector of North American railroads and founder of the Ball Watch Company.
For more information, visit this Wikipedia article
on railroad chronometers or this Smithsonian National Postal Museum article
on the influential train wreck tragedy that resulted in the establishment of railroad watch standards.
Our entire collection of such timepieces may also be viewed at our Railroad Grade Watches
With the notable exception of the Masonic watches produced by the Dudley Watch Company (1920-1925), the Mason, Knights of Columbus and other logos would have been commissioned through a professional dial company after they left the factory to have the logo applied. For instance, all the members of a particular chapter may have received a specific watch when they were initiated or may have elected to have an emblem added to their own personal watch to commemorate an important date or milestone.
If you are interested in this watch without the current advertising dial, please drop us a note
. On wrist watches, we can give you a quote on what the current charge to re-finish the dial would be (typically it will run $35 to $75 depending on the dial style). On American-make pocket watches, we may have a replacement dial in stock and could exchange the current dial with an unmarked dial for a small fee. Most European-make watches would need to have the dial refinished to remove the emblem.
Unlike modern quartz watches, most vintage watches need daily winding in order to keep the watch functioning for timekeeping. Additionally, there are a number of different ways to set the time other than simply pulling the crown away from the watch body. We are happy to provide an overview of each of the different setting types on our "How To Use" page
, where we also provide information on proper winding techniques for each style and some suggestions for the proper long term care and storage of your watch.