Howard 16S 19J lever set (LS) adj 5p series 5 pocket watch #1090374, handsome nickel bridge movement with red ruby jewels in raised gold jewel settings and a bar-style damascene pattern, watch is running well with a smooth balance motion however there is an incorrect jewel modification on the center wheel (upper) jewel, double-sunk (DS) porcelain enamel dial with fancy Arabic-style numbers, red 5 minute markers and a subsidiary seconds register has some small flakes and expert repairs along the edge of the dial, blue steel cross-bar diamond & triangle style hands, heavy 14k yellow gold smooth polish Howard hinge back & bezel (HB&B) case with recessed hinges, heavy pendant and a large French-style bow, case is showing normal even wear overall however on the back outer cover the extension lip that would normally cup the base of the pendant (see the front cover) is missing, it may be a factory defect or was done by an expert jeweler, measures approx. 49mm in diameter x 67mm in length x 15mm thick (crystal included). A high grade triple signed Keystone Howard pocket watch from the early 1900s in very good condition!
- Year Made: 1911-1912
- Company: Howard
-
Movement Size:
0516S
- Jewels: 0919J
- Setting/Movement Type:
lever set
- Adjustments: 5 positions
- Model/Grade: Series 5
- Serial #: 1090374
- Movement Finish: nickel
- Movement Details: bridge layout
- Dial Material: porcelain enamel
- Hand Style:
diamond - standard, triangle
- Case Style:
HB&B
-
Case Material:
Solid Gold - Yellow
- Case Details: Howard
-
Case Width/Diameter:
49mm (1.93 inches)
-
Case Length, bow included: 67mm (2.64 inches)
-
Case Thickness: 15mm (0.59 inches)
- Crystal Material: plastic
- Condition:
Very Good
-
Gender:
Gentlemen's
The E. Howard & Co. watch business was founded in 1858 in Boston, Massachusetts and produced watches until 1903. This early company was distinctive for early high grade watches, many innovations in watch construction, and their unique sizing system for their movements, which were marked as "E. Howard & Co." In 1902, the Edward Howard name was purchased by the Keystone Watch Case Company, and the resulting Howard watches from this new era were then marked as "E. Howard Watch Co." These later Howard watches are often referred to as "Keystone Howards."
As an additional resource, we've posted a
Serial Number Production List which includes information for E. Howard serial numbers and dates of manufacture.
The NAWCC also has an
article about the earlier E. Howard Co., as well as an
article on the later history of the company after the purchase by Keystone.
You may browse all of our men's pocket watches from this manufacturer at our
Vintage Men's Howard Pocket Watches category.
This watch is in good running condition, unless otherwise noted in the description. This means that on receipt, pending any item-specific running conditions noted in the description, you can expect the watch to be winding and setting properly and to run smoothly while keeping reasonable time. We consider "reasonable time" to meet these basic guidelines:
- Railroad Grade Watches will be keeping +/- 5 minutes per day
- Pocket and Wrist Watches with 15 or more jewels will be keeping +/- 10 minutes per day
- All key wind watches and watches with 14 or fewer jewels will be keeping +/- 15 minutes per day
The above guideline is the lowest standard in which we would ship out a watch, however in most cases, you will see much better timekeeping. Most of our watches have been in storage for many years, so if you plan on carrying/wearing them everyday, you should consider having them cleaned and oiled soon, and then once a year thereafter to keep them in top running condition. If the watches will be for occasional use or display, they should be cleaned and serviced every 3 to 5 years depending on use.
As of January 27th, 2023, we are not offering a cleaning and service option through PM Time Service. While we do hope to offer this again in the future, we are unfortunately unable to meet customer requests for watch servicing at this time. Please note that, unless otherwise mentioned within the "Full Description" tab, this watch is being sold in good running condition and is ready to wear or carry on arrival.
This is considered a "railroad-grade" pocket watch. To be a railroad-grade watch, the following criteria must be met:
- be 16S or 18S
- have 17 or more jewels
- be lever set
- be in an open face case
- be adjusted to 5 or more positions.
- have easily-legible Arabic dial numerals
In order to ensure the accuracy of pocket watches used by railroad employees, with the ultimate goal of preventing train accidents, the General Railroad Timepiece Standards Commission published a set of guidelines for railroad companies and watch manufacturers in 1893. These guidelines, which specified the criteria for a railroad-grade watch, were prepared by Webb C. Ball, the general time inspector of North American railroads and founder of the Ball Watch Company.
For more information, visit this
Wikipedia article on railroad chronometers or this
Smithsonian National Postal Museum article on the influential train wreck tragedy that resulted in the establishment of railroad watch standards.
Our entire collection of such timepieces may also be viewed at our
Railroad Grade Watches category.
Unlike modern quartz watches, most vintage watches need daily winding in order to keep the watch functioning for timekeeping. Additionally, there are a number of different ways to set the time other than simply pulling the crown away from the watch body. We are happy to provide an overview of each of the different setting types on our
"How To Use" page, where we also provide information on proper winding techniques for each style and some suggestions for the proper long term care and storage of your watch.
For your gift giving convenience, please find a consolidated overview of the information on this item, with no reference to the price, on this
printer-optimized page.
