Illinois for Hoglund & Berg 18S 17J lever set (LS) grade 69 pocket watch #2651773, impressive nickel full-plate movement with screw-down jewel settings, an elaborate concentric circle damascene pattern and is marked "Hoglund & Berg - Park Region - Alexandria, Minn.", porcelain enamel dial with bold fancy Arabic-style numbers, red 5 minute markers, a subsidiary seconds register and is marked "Hoglund & Berg", dial has a number of hairlines, blue steel spade & whip style hands, heavy yellow gold filled (YGF) smooth polish swing-out case with a large bow and a fancy monogram on the back, possibly "EI", case is showing normal even wear overall however there are patches of brass starting to show on the frame, bezels and bow, measures approx. 56mm in diameter x 80mm in length x 18mm thick (crystal included). A heavy and high quality private label jewelers' marked watch from the early 1900s in very good condition!
- Year Made: 1914-1915
- Company: Illinois for Hoglund & Berg
- Jewels: 17J
- Setting/Movement Type:
- Model/Grade: 69
- Serial #: 2651773
- Movement Finish: nickel
- Movement Details: marked "Hoglund & Berg - Park Region - Alexandria, Minn."
- Dial Material: porcelain enamel
- Dial Details: jeweler's mark, "Hoglund & Berg"
- Hand Style:
- Case Style:
Gold Filled - Yellow
- Case Details: monogram, monogram
Case Length, bow included:
- Crystal Material: plastic
This watch is in good running condition, unless otherwise noted in the description. This means that on receipt, pending any item-specific running conditions noted in the description, you can expect the watch to be winding and setting properly and to run smoothly while keeping reasonable time. We consider "reasonable time" to meet these basic guidelines:
- Railroad Grade Watches will be keeping +/- 5 minutes per day
- Pocket and Wrist Watches with 15 or more jewels will be keeping +/- 10 minutes per day
- All key wind watches and watches with 14 or fewer jewels will be keeping +/- 15 minutes per day
The above guideline is the lowest standard in which we would ship out a watch, however in most cases, you will see much better timekeeping. Most of our watches have been in storage for many years, so if you plan on carrying/wearing them everyday, you should consider having them cleaned and oiled soon, and then once a year thereafter to keep them in top running condition. If the watches will be for occasional use or display, they should be cleaned and serviced every 3 to 5 years depending on use.
As of November 28th, 2022, we are not offering a cleaning and service option through PM Time Service. While we do hope to offer this again in the future, we are unfortunately unable to meet customer requests for watch servicing at this time. Please note that, unless otherwise mentioned within the "Full Description" tab, this watch is being sold in good running condition and is ready to wear or carry on arrival.
This watch features a jeweler's mark, or name of the retailer that originally sold the watch, in addition to the name of the watch manufacturer. Jeweler's marks may be engraved or printed on the dial, case or movement, depending on the watch. See the Full Description for details specific to this piece.
The jewelers' mark was a pretty common practice during the early to mid-1900s, and does continue today. A jewelry shop would commission a small run of watches directly from a watch manufacturer, such as Hamilton, Illinois, etc., who would then add markings for that jeweler at the factory to the dial, movement and/or case. This would allow for the jeweler to offer a customized branding of a high quality watch without the prohibitive cost of directly manufacturing the watch components and assembly.
The most common example that most will recognize is with Tiffany & Co., which for a short time did manufacture their own watches but realized it was cost prohibitive for their label and transitioned to commissioning watches from high-end watch manufacturers instead. On many of their vintage watches, you'll see the "Tiffany & Co" markings on the dial, and occasionally also stamped on the movement and case, but additional markings on the movement will show Longines, International Watch Co., etc. to also indicate the manufacturing company.
Unlike modern quartz watches, most vintage watches need daily winding in order to keep the watch functioning for timekeeping. Additionally, there are a number of different ways to set the time other than simply pulling the crown away from the watch body. We are happy to provide an overview of each of the different setting types on our "How To Use" page
, where we also provide information on proper winding techniques for each style and some suggestions for the proper long term care and storage of your watch.
For your gift giving convenience, please find a consolidated overview of the information on this item, with no reference to the price, on this printer-optimized page